High pressure wear resistant type floating pneumatic fender aging
resistance
Introduction of floating pneumatic fender:
Floating pneumatic fender is a popular ship fender product in the
world today. It uses compressed air as buffer medium to make the
ship hit the wall more soft when berthing. It has the advantages of
large impact energy absorption, low area pressure acting on the
ship, excellent impact fatigue resistance, easy installation, etc.
Widely used in large oil tanker, liquefied gas ship, chemical ship,
offshore platform, large dock, sea, etc.; Beierte floating
pneumatic fender products are reliable.
Inflatable rubber fender is a new type of winding fender, abrasion
resistance, scratch resistance, resistance to ageing, stung, etc,
the appearance of the most prominent feature is the surface of the
pneumatic rubber fender ontology by a tire chain net type sheathed
packages, protect the fender of ontology is stung by sharp objects,
scratches, drop and so on, which is a fender ontology use fixed
number of year.
Company Introduction:
Company's long-term commitment to floating pneumatic fender,
yokohama pneumatic fender, Marine fender products research and
development, production and sales, inflatable rubber fender, using
natural rubber and styrene butadiene rubber, polybutadience rubber,
such as synthetic rubber, rubber hard, more abrasion resistance and
toughness, product use high quality materials and special
explosion-proof technology, sightseeing along the outside, good
wear resistance, aging resistance, air tightness, high intensity,
long service life, high quality, and adopted the ISO9001: 2008
international quality management system certification and CCS, ABS,
BV, DNV, GL, LR and other product quality certification, and for
the national large construction enterprises and wharf protection to
provide products and services.
Floating pneumatic fender operating instructions and maintenance
precautions
1. The maximum deformation of Marine inflatable fender in the use
process is 60% (except for special ship type or special operation),
and the use pressure is 50kpa-80kpa (the use pressure can be
determined according to the user's ship type, tonnage size and near
environment).
2, pneumatic rubber fender should pay attention to avoid sharp
objects in the use of puncture and scratch; And timely maintenance
and maintenance, in general 5- 6 months for a pressure test.
3, often check the pneumatic rubber fender body for puncture,
scratch. The surface objects in contact with the ship's fender
shall not have sharp protruding hard objects to prevent punctures
of the fender. When the fender is in use, the cable or chain or
wire rope hanging the fender shall not be knotted.
4. When the Yokohama fender is not in use for a long time, it
should be cleaned, dried in the sun, filled with appropriate amount
of gas, and placed in a dry, cool and ventilated place.
5. Shipboard fender should be kept away from heat, and should not
contact with acid, alkali, grease and organic solvents.
6, do not pile up when not in use, do not pile up heavy objects on
the fender.
Floating pneumatic fender performance
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Picture of floating pneumatic fender
